Baumit NanoporColor Self Cleaning Facade Paint – 14L

Suitable for multiple surface types both inside and out, this Baumit NanoporColor exterior paint is imbued with photocatalytic self-cleaning properties. Naturally dirt-resistant, it will look fresh and clean for longer. Its innovative composition and structure also make it highly stain resistant.

This Baumit NanoporColor can be applied directly onto any pre-prepared plaster, lime and cement render, filler, concrete and other mineral and organic substrates. Available in a wide selection of colours, it is ready to use and can be applied to a prepared surface using a brush or roller. Its coverage averages at 0.32L/m².

Features & Benefits: Baumit NanoporColor Self Cleaning Facade Paint – 14L

• Mineral-based non-film internal and external paint
• Highly weather and pollution resistant
• Suitable for multiple surface types
• Highly permeable
• Stain-resistant microstructural composition
• Available in a wide selection of colours
• 14L volume
• Approximately 0.32L/m² coverage

This Baumit NanoporColor has been designed to work with most building surface types, both internal and external. Surfaces will need to be appropriately prepared, clean and sound and not coated with any waterproof or water-resistant products. Drying time is approximately fourteen days in areas with temperatures around 20°C and 60% humidity. Other environments may increase drying times.

Typical applications will require two coats of Baumit NanoporColor, with the second being applied when the first is fully dry. For areas with increased humidity or high moisture content, extra protection may be required.